Selling Price -
2024 Elmer's Manufacturing Solid Pull Super 7 7 – 70’
Solid Pull SUPER 7 harrowThe Solid Pull Super 7 Harrow is equipped with solid pull arms and Secure Lock, a custom hydraulic locking system, to increase the harrow's capabilities and safety. It has the same great features as past models, including the 7-bar design and three dimensions of adjustability. The 7-bar design creates up to 40% more harrowing action compared to 5-bar harrows while the three dimensions of adjustability adapt to the needs of your field. The 40-90 degrees of tine angle adjustment allows for more or less harrowing, 10 inches of vertical down pressure for how much pressure is onto the field and section angle control for ideal residue and seedbed management.
ONE HARROW FOR IT ALLThe Solid Pull Super 7 Harrow gives you full control to chop straw, spread residue and incorporate seed and chemicals without compromising on your field finish.
ADAPTABLE TO YOUR NEEDSTine Angle, Section Angle and Pitch allow you to set your aggressiveness to your desired field finish whether that is in straw or residue management or in seedbed preparation.
GET 40% MORE DONE PER PASSThe Solid Pull Super 7 Harrow with 7 bars of tines allows you to get 40% more done per pass in comparison to a 5-bar harrow.
- 2024
- Elmer's Manufacturing
- Solid Pull Super 7
- 7 – 70’
- Harrow
- Recommended Power: 350+ Hp
- 550 / 45 - 22.5 (16 ply) | Wing: 360 / 60 - 22.5 (16 ply)
- 12 Volt Amperage: 15 Amps
- Min: 10 GPM / Max: 35 GPM
- Recommended Min Hydraulic Pressure: 2,800 PSI
- Tine Spacing: 1 7/16” | Harrow Bar Spacing: 14” (35.5cm) | Tine Size 1/2” Diameter x 22” Long | Hitch frame: 4” x 8” - 1/4” Wall Tube | Wing: 8”x8”x1/4” | Angle Adjust: 90°- 45° | Vertical Adjust: 10” | Harrow Section Roll: ±5°
- 15’
- 12’10”
- 54’ 4”
- Approximate: 13,000 lbs
- Harrow Sections: 7 x 7 Bar | Pul Arm Type: Solid Bar
- 294
- SD770024033
- Trochu, Alberta
- New
- 31853
- 2024
- Elmer's Manufacturing
- Solid Pull Super 7 7 – 70’
- SD770024033
- Available
- SD770024033